1. Project Management and Engineering Services Group at SE RAO for consulting services for tasks on decommissioning of units 1 ÷ 4 and site selection, design, safety assessment, construction and commissioning of the National Repository for radioactive waste (Subcontractor of Consortium with Empresarios Agrupados and Nuvia)
  2. Installation of new heat exchangers TS10W01,02,03 (from hydrogen afterburning system) and shut-off and drainage fittings on the lines of the technical water system, providing the possibility of shut-off and flushing of the heat exchangers at Kozloduy NPP
  3. Design and implementation of a system for heating and cooling the metal of the water chambers and tube sheets of high-pressure chamber-type heaters (PVN-K) for Kozloduy NPP
  4. Modernization of control and management systems of Special Building 3 (SK-3) of Kozloduy NPP (Subcontractor of Westinghouse)
  5. Project for installation of L-shaped crane 5.6YW00E09 in the central hall, in the area of the Main Circulation Pumps 5.6YD10(40) at Kozloduy NPP
  6. Expertise of the technical documentation for unit 6 under the project: “Development of an advanced nuclear fuel cycle and justification of the safe operation of units 5 and 6 of Kozloduy NPP EAD with modified nuclear fuel with a capacity of 3120 MW”
  7. Investigation of the operating modes of the HVAC system in the Radioactive Waste Processing Plant (RWP) at the Kozloduy NPP site
  8. Design of steam and condensate pipelines serving the blowing system of the biofuel combustion boiler at Mondi Stamboliyski EAD
  9. Design of pipelines for PM2 paper machine at Mondi Stamboliyski EAD
  10. Design of a new pipeline for draining High Pressure Preheaters (HPH) at idle speed of the turbogenerator (TG) at low power up to 100 MW for units 5 and 6 at Kozloduy NPP
  11. Design of a new line from the steam generator purge system to the technological condenser for units 5 and 6 at Kozloduy NPP
  12. Performing a hydrodynamic check of foreign body migration in the cooling system of the 10GQ generator at Kozloduy NPP
  13. Computational check of underground pipeline No. 5 from the technical water system for responsible users (QF) at Kozloduy NPP
  14. Design of an overpass for moving diesel units in a horizontal direction at EUROMETAL
  15. Author’s supervision and technical assistance during the implementation of construction and installation works (C&I) of the investment project “Design and implementation of a system for heating and cooling the metal of the water chambers and tube sheets of high-pressure chamber-type heaters (PVN-K) at the NPP “Kozloduy”
  16. Implementation of repair and electrical installation activities on main and auxiliary equipment and systems of nuclear power units 5 and 6 during and/or related to the planned annual repairs in 2016. at Kozloduy NPP
  17. Delivery of repairable check valves for emergency feedwater system at Kozloduy NPP
  18. Reconstruction of hydrazine hydrate storage facility at Kozloduy NPP
  19. Strength analysis of tube bundle of high pressure heaters PVN–6 and PVN–7 at AES Galabovo TPP
  20. Design of a new expansion tank of turbogenerators TG–9 and 10 at Kozloduy NPP
  21. Preparation of an analysis of the possibilities for temporary storage of radioactive waste (RAW) resulting from the decommissioning activities of units 1-4 of Kozloduy NPP on the territory of the extension of the dry storage facility for spent nuclear fuel (HSSFSF Stage Ia)
  22. Design of a new pipeline for additional drainage of the outlet pipes of pipelines 5SA10 to 5RB10,20,30,40W01 in front of 5SH13S03,04 to 5SD11, which will ensure sufficient throughput for their normal drainage during the deployment of 9TG at Kozloduy NPP
  23. Design of steam pipelines 11b in PM2 at Mondi Stamboliyski EAD
  24. Modification and seismic strengthening of the metal structure of cranes 5,6UQ00E01 at Kozloduy NPP
  25. Rerouting of the pipelines for supplying condensate from the steam superheater separator SPP to the CN (5,6 SH31, 32S01) at Kozloduy NPP
  26. Expertise of selected reports from Stage 2 of the project for extending the operational life of Unit 5 of Kozloduy NPP, related to substantiation of the possibility of safe operation of the reactor vessel and part of the main building structures
  27. Additional analysis for assessing the behavior of “TVSA” and “TVSA-12” type cartridges with mixed fuel loadings under the conditions of expected operational events at Kozloduy NPP
  28. Design of technological pipelines of the system for capturing and transporting turpentine in the workshop: Cellulose of “Mondi Stamboliyski” EAD
  29. Reconstruction of the steam pipeline “Drainage of sharp steam” at AES “Galubovo”
  30. Performance of strength testing of membrane-type seam joints of heat exchangers for emergency and planned cooling of the primary circuit 5TQ10,20,30W01 at Kozloduy NPP
  31. Design of a new line after 5RY10S32;5RY10S33 and 6RY40S01;6RY40S02 at the entrance to 5(6)RR20W01 after 5(6)RN11S20” at Kozloduy NPP

Trainings

Future in Energy industry!

We created the internship program in line with our mission to build a better future for young people in Bulgaria. We strive to provide employment in a dynamic and innovative environment, to support hard work, ambition and talent.

  • ENPRO Consult Ltd. gives students of Nuclear Energy and Thermal Power Engineering the opportunity to work in the company's office and get to know the business up close. The duration of the internships is 3 months (July, August and September). The deadline for submitting documents is the end of June each calendar year.

See what you will get if you intern with us:

Training from some of the best professionals in the energy industry

Development of skills through a variety of tasks and projects

Working with modern technologies and innovative methods

Spirit of cooperation and support in close-knit teams

Individual program

Constant feedback from a personal mentor

Monthly remuneration

Opportunity for a longer-term commitment to the company

Requirements for candidates:

– To be students in the 2nd, 3rd and 4th year, studying the specialty "Thermal Power Engineering or Nuclear Power Engineering"

– To have a minimum GPA of 4.00 in the last semester;

– To show high motivation and desire for development, as well as high personal discipline.

Application documents

  1. Motivation letter for applying for the program, for development in the relevant field, interests and extracurricular activities/projects and professional experience.
  2. Certificate from the Technical University - city Sofia or Sofia University "Kliment Ohridski" that for the current academic year the student is enrolled in a full-time form of study in one of the specified programs.
  3. A copy of a bachelor's degree diploma or a certificate of completion of a degree with a calculated average grade point average. For applicants after the first semester of the master's program, an additional certificate with a calculated average grade point average for the semester before application is required.

Only candidates approved on the basis of documents will be invited to an interview.

ENPRO Consult OOD informs you that some of the voluntarily provided data are personal and fall under a special protection regime within the meaning of Regulation 2016/679 and the Personal Data Protection Act. The personal data provided will be processed to achieve legally permitted purposes related to this internship, as well as to realize the legitimate interests of the personal data administrator. ENPRO Consult OOD processes, stores and uses the voluntarily provided personal data within the legally regulated deadlines, ensuring their security and confidentiality.

Thank you for your interest and we look forward to your applications.

Certificates